Structured cabling

Telenco hybrid cables are specially developed for indoor rollout. They are strong and flexible for easy installation. These cables are B2ca certified and are suitable for rollout in all...

Telenco hybrid cables are specially developed for indoor rollout. They are strong and flexible for easy installation. These cables are B2ca certified and are suitable for rollout in all buildings open to the public. Telenco's hybrid patch cords complete its range of hybrid cables. They have been developed to easily and faultlessly connect active equipment to the hybrid patch panel or the hybrid box to the antenna. Their design and very small diameter make them a very discreet solution when antennae are visible. Their flexibility makes installation quick and easy.

Telenco single-mode indoor trunks facilitate the rollout of cabling in telecoms networks, data centres, and environments requiring high connection density. These trunks make installation...

Telenco single-mode indoor trunks facilitate the rollout of cabling in telecoms networks, data centres, and environments requiring high connection density. These trunks make installation easier and quicker, thanks to their reduced cable diameter and small footprint. Telenco's single-mode indoor trunks are pre-terminated in our factory, enabling rapid connection between different equipment. They are 100% configurable and terminable on one or both sides.

Whether equipped or empty, Telenco's sliding patch panels are available in single-mode and multimode versions and offer a wide range of connectivity options. Intuitive and ergonomic, they...

Whether equipped or empty, Telenco's sliding patch panels are available in single-mode and multimode versions and offer a wide range of connectivity options. Intuitive and ergonomic, they facilitate the interconnection of optical fibres and active equipment thanks to simplified management and optimised fibre storage.

Modular solutions, consisting of a chassis and several modules, are specially designed to meet the needs of FTTH networks, data centres, or private networks requiring medium optical connection...

Modular solutions, consisting of a chassis and several modules, are specially designed to meet the needs of FTTH networks, data centres, or private networks requiring medium optical connection densities and a high degree of modularity. Modular solutions provide a 100% modular and cost-effective solution for networks. The 7HP and MD (Medium Density) modular solutions are available in patching, splicing, MTP transition, coupler and WDM versions.

Telenco optical cables are available in patch cord and subscriber versions. Optical patch cords offer optimum performance to ensure reliable networks. They serve to interconnect telecoms...

Telenco optical cables are available in patch cord and subscriber versions. Optical patch cords offer optimum performance to ensure reliable networks. They serve to interconnect telecoms networks and are therefore very much in demand. Subscriber optical cables are used to connect the PTO or DTIO to the ONT or the operator's box. Their structure is designed to withstand residential use. They are also available in a stainless steel reinforced version for extreme resistance to crushing. Optical cables can be fitted with standard SC and LC connectors, SC Secure or SC permanently protected connectors.

Very high-speed networks require test and measurement equipment that improves the productivity of production teams, qualifies infrastructures and can perform all the diagnostics required...

Very high-speed networks require test and measurement equipment that improves the productivity of production teams, qualifies infrastructures and can perform all the diagnostics required for maintenance.

Drawing on its experience, Telenco is developing solutions to optimise optical networks designed to serve mobile sites based on WDM (Wavelength-Division Multiplexing), optical filters and...

Drawing on its experience, Telenco is developing solutions to optimise optical networks designed to serve mobile sites based on WDM (Wavelength-Division Multiplexing), optical filters and splitters. Our solutions have enabled us to implement optimised 10 Gb service networks on just 2 optical fibres, while ensuring redundancy. Wavelength-division multiplexing enables several circuits to be carried on a single fibre or pair of fibres, optimising the use of leased fibres or cables approaching saturation.

Field-mountable connectors offer optical performance similar to that provided by standard connectors. They are quick and easy to install on site, and extremely reliable. These connectors...

Field-mountable connectors offer optical performance similar to that provided by standard connectors. They are quick and easy to install on site, and extremely reliable. These connectors can be installed on 250 µm, 900 µm or 3 mm fibre-optic cables.

Telenco's single-mode optical pigtails are fibre-optic cables with a connector installed on one end, leaving the other end bare. The side with the connector can be connected to equipment,...

Telenco's single-mode optical pigtails are fibre-optic cables with a connector installed on one end, leaving the other end bare. The side with the connector can be connected to equipment, and the other side soldered with fibre-optic cables. Pigtails are used to terminate fibre-optic cables by fusion or mechanical splicing. They serve to interconnect telecoms networks and are therefore very much in demand. They can be fitted with standard SC, LC and FC connectors.

The Telenco Group develops and manufactures reliable cable management pathway solutions to adapt to all usage constraints and harsh environmental conditions. Thanks to its expertise in...

The Telenco Group develops and manufactures reliable cable management pathway solutions to adapt to all usage constraints and harsh environmental conditions. Thanks to its expertise in the development and manufacture of metal and plastic components, the Group offers solutions tailored to the deployment of cables on pylons, roof terraces or indoors, in data centres and in industry. Several finishes are available: hot-dip galvanised, electro-galvanised, magnelis, plastic.

Telenco's single-mode attenuators are used with fibre-optic equipment and cables to reduce the power level of the optical signal. They therefore avoid any risk of damage to the measurement...

Telenco's single-mode attenuators are used with fibre-optic equipment and cables to reduce the power level of the optical signal. They therefore avoid any risk of damage to the measurement devices or active equipment. In male/female format, they are fixed directly between the plugs and the optical adaptors.

Telenco's hybrid boxes are specially designed for indoor mobile deployments, created to be close to antennas and simplify installation. Their compact size and cover/support make them easy...

Telenco's hybrid boxes are specially designed for indoor mobile deployments, created to be close to antennas and simplify installation. Their compact size and cover/support make them easy to install on walls or false ceilings, while allowing for streamlined copper and fibre connections in all conditions. Their steel structure makes them particularly strong and able to handle very rigid hybrid cables. Their unique design allows for tool-free work.

Telenco's hybrid connection cables have been developed to easily and flawlessly connect active equipment to hybrid patch panels, or hybrid boxes to the antenna. Their design and very small...

Telenco's hybrid connection cables have been developed to easily and flawlessly connect active equipment to hybrid patch panels, or hybrid boxes to the antenna. Their design and very small diameter make them a very discreet solution when antennae are visible. Their remarkable flexibility makes installation quicker and easier.

Telenco single-mode adaptors can be used to couple fibre-optic connectors. They are fitted with a high-precision ceramic sleeve and offer excellent optical performance.