Subscriber connection

Eline® OTO for splicing /OTO for DIN rail boxes are the connection points for the fibre-optic (FTTH) telecoms network at the subscriber's premises. Our OTO boxes are designed to facilitate...

Eline® OTO for splicing /OTO for DIN rail boxes are the connection points for the fibre-optic (FTTH) telecoms network at the subscriber's premises. Our OTO boxes are designed to facilitate the technician's work and to blend discreetly into the home. These 1, 2 or 4 FO boxes meet all deployment requirements. Depending on the version, the 80 x 80 mm OTO boxes can be mounted directly on the wall, or as a flush-mounted box or on a DIN rail. The OTO for DIN rail boxes in circuit-breaker format are designed especially for DIN rail mounting, thus optimising space requirements within a communication enclosure.

OTO for splicing/ OTO for DIN rail kits are quick installation solutions for OTOs pre-assembled in the factory with a customer drop cable. This solution has been designed to reduce the...

OTO for splicing/ OTO for DIN rail kits are quick installation solutions for OTOs pre-assembled in the factory with a customer drop cable. This solution has been designed to reduce the time it takes for a field engineer to visit the customer's premises.Supplied in boxed reels, the kits can be unrolled and installed quickly, reliably, and easily. This eliminates the need for splicing on the customer's premises. Several sizes are available, depending on the type of Droptic® cable used, to optimise transport and storage space and reduce carbon footprint.

Eline® PBIs are building connection point boxes developed to connect the fibres of the building riser cable to the subscriber socket. They can be used to connect up to 12 customers in the...

Eline® PBIs are building connection point boxes developed to connect the fibres of the building riser cable to the subscriber socket. They can be used to connect up to 12 customers in the SC spliced or pre-terminated version, or up to 16 customers in the LC version.They can be installed indoors in a technical duct or juxtaposed visibly to a trunking. They allow direct connection or the use of 1×4 or 1×8 splitters. PBICs are a version with a building connection point connector and provide a "plug and play" solution for the customer connection.

Eline® PBOs can be installed on poles or facades to connect up to 12 customers. They are available in spliced versions and also pre-terminated for "plug and play" subscriber connection....

Eline® PBOs can be installed on poles or facades to connect up to 12 customers. They are available in spliced versions and also pre-terminated for "plug and play" subscriber connection. A bypass can be used to supply a second PBO. All Eline® PBOs are delivered pre-equipped and require no additional components. They allow customer connections via splices or directly via SC or LC connections for PBO T1 and T2 versions. The Optopod version has an external waterproof connector for customer connection. PBOs are also available with 1x8 splitters.

Eline® PMIs can be used to connect buildings to the fibre-optic network for connecting and patching subscriber links. They are designed to be stacked in order to increase capacity or manage...

Eline® PMIs can be used to connect buildings to the fibre-optic network for connecting and patching subscriber links. They are designed to be stacked in order to increase capacity or manage the arrival of several operators.Eline® PMIs are available in 24, 48 or 72 FO versions, fitted with adaptors, splice-trays, or pigtails. These are metal enclosures with openings for cross-connection between several modules when installed in cascade. PMIs are an ideal solution for routing optical fibre to the foot of residential buildings.

Eline® BTOs provide a secure transition between two optical drop cables. They can also be used for repairs between two outdoor cables. Eline® DPMs ensure the safe passage of the cable through...

Eline® BTOs provide a secure transition between two optical drop cables. They can also be used for repairs between two outdoor cables. Eline® DPMs ensure the safe passage of the cable through the wall.The transition boxes are available in several colours to limit their visual impact. Eline® BTOs are fitted with a splice-tray for up to 4 splices. Depending on the version, they can be mounted on a post, on a facade or in a chamber. Eline® DPMs allow the Droptic® drop cable to be guided through the wall, guaranteeing its protection and bending radius.

Droptic® indoor drop cables are used to connect individual and collective residential units to FTTH infrastructure. They offer easy access to the fibre and mechanical performance that makes...

Droptic® indoor drop cables are used to connect individual and collective residential units to FTTH infrastructure. They offer easy access to the fibre and mechanical performance that makes them easy to install. These cables are specifically designed for indoor fibre optic rollout, from the point of connection to the subscriber's final outlet. They can be laid in cable trays, pulled, pushed, routed inside occupied ducts or simply stapled or glued along skirting boards. Their LSZH sheathing complies with the European Construction Products Regulation.

Droptic® outdoor drop cables offer great versatility. They can be installed overhead or underground, using pulling techniques, over several hundred metres in length. These cables provide...

Droptic® outdoor drop cables offer great versatility. They can be installed overhead or underground, using pulling techniques, over several hundred metres in length. These cables provide a degree of flexibility when deploying networks, while offering optimum optical performance. They are manufactured with black, high-density polyethylene outer sheaths that are UV, wear and tear resistant. This gives them high mechanical performance.

Droptic® indoor/outdoor drop cables have a double sheath or a UV-resistant LSZH sheath. They are designed to be multi-purpose, enabling practical and rapid installation during FTTH rollouts....

Droptic® indoor/outdoor drop cables have a double sheath or a UV-resistant LSZH sheath. They are designed to be multi-purpose, enabling practical and rapid installation during FTTH rollouts. In the case of double-sheathed cables, the outer HDPE sheath is quickly and easily stripped to make way for an inner sheath that complies with the Construction Products Regulations: halogen-free, low-smoke and fire-retardant. No intermediate splice is required.

Droptic® indoor drop cables are pre-terminated at the factory. They have SC/APC or LC/APC connectors at one or both ends. They guarantee a high and lasting level of optical performance,...

Droptic® indoor drop cables are pre-terminated at the factory. They have SC/APC or LC/APC connectors at one or both ends. They guarantee a high and lasting level of optical performance, while reducing connection times. Pre-terminated cables enable interconnection between the various equipment and flexibility points in the network: indoors, for example, to connect the operator's box to an optical wall socket, the cables comply with construction product directives on fire behaviour.

Droptic® outdoor drop cables are pre-terminated at the factory. They have rugged connectors at one or both ends. They guarantee a high and lasting level of optical performance, while reducing...

Droptic® outdoor drop cables are pre-terminated at the factory. They have rugged connectors at one or both ends. They guarantee a high and lasting level of optical performance, while reducing connection times. Cables are used to interconnect the network's various equipment and flexibility points: outdoors, to connect a PBO to a pre-terminated wall-mounted transition box, for example, the cables have the mechanical and weather resistance required for installation in difficult conditions.

Droptic® pre-terminated indoor/outdoor drop cables provide a safe and easy connection between the optical connection point and the customer's home. These cables are versatile, as they can...

Droptic® pre-terminated indoor/outdoor drop cables provide a safe and easy connection between the optical connection point and the customer's home. These cables are versatile, as they can be installed overhead or underground, but they can also be used in the interoperability zone of pre-terminated PBOs. During installation, the connector and fanout are mechanically protected by a pre-installed flexible device.

Telenco single-mode indoor trunks facilitate the rollout of cabling in telecoms networks, data centres, and environments requiring high connection density. These trunks make installation...

Telenco single-mode indoor trunks facilitate the rollout of cabling in telecoms networks, data centres, and environments requiring high connection density. These trunks make installation easier and quicker, thanks to their reduced cable diameter and small footprint. Telenco's single-mode indoor trunks are pre-terminated in our factory, enabling rapid connection between different equipment. They are 100% configurable and terminable on one or both sides.

Telenco single-mode outdoor trunks make it easier to roll out cabling in outdoor telecoms networks. They are optimised for interconnecting 4G/5G (FTTA) equipment. Specially designed to...

Telenco single-mode outdoor trunks make it easier to roll out cabling in outdoor telecoms networks. They are optimised for interconnecting 4G/5G (FTTA) equipment. Specially designed to withstand harsh environments, they offer enhanced protection against external thermal, mechanical, UV and rodent attack, while retaining a lightweight but highly resistant cable structure. They enable rapid connection between different pieces of equipment.

Telenco's single-mode sliding patch panels have been specially designed for optical network applications (19" or ETSI racks). Thanks to their intuitive design and ergonomics, Telenco single-mode...

Telenco's single-mode sliding patch panels have been specially designed for optical network applications (19" or ETSI racks). Thanks to their intuitive design and ergonomics, Telenco single-mode sliding patch panels are easy to use. Telenco single-mode sliding patch panels are used for splicing and cross-connecting optical fibres. In the splicing version, they are equipped with optical connectors and assembled pigtails, splice trays, and accessories. They are also available in trunk and adaptor versions. The sliding patch panels are ready to install.

Modular solutions, consisting of a chassis and several modules, are specially designed to meet the needs of FTTH networks, data centres, or private networks requiring medium optical connection...

Modular solutions, consisting of a chassis and several modules, are specially designed to meet the needs of FTTH networks, data centres, or private networks requiring medium optical connection densities and a high degree of modularity. Modular solutions provide a 100% modular and cost-effective solution for networks. The 7HP and MD (Medium Density) modular solutions are available in patching, splicing, MTP transition, coupler and WDM versions.

Telenco optical cables are available in patch cord and subscriber versions. Optical patch cords offer optimum performance to ensure reliable networks. They serve to interconnect telecoms...

Telenco optical cables are available in patch cord and subscriber versions. Optical patch cords offer optimum performance to ensure reliable networks. They serve to interconnect telecoms networks and are therefore very much in demand. Subscriber optical cables are used to connect the PTO or DTIO to the ONT or the operator's box. Their structure is designed to withstand residential use. They are also available in a stainless steel reinforced version for extreme resistance to crushing. Optical cables can be fitted with standard SC and LC connectors, SC Secure or SC permanently protected connectors.

For more than 20 years, Telenco has been supplying pole equipment (supports, brackets, crosspieces, etc.), constantly adapting its range to changes in the structure of telecoms cables to...

For more than 20 years, Telenco has been supplying pole equipment (supports, brackets, crosspieces, etc.), constantly adapting its range to changes in the structure of telecoms cables to ensure perfect product compatibility.

Overhead support consolidation operations can be carried out using different methods, such as cable-staying, coupling and anchor-strut pole. These solutions involve supporting the telecommunications...

Overhead support consolidation operations can be carried out using different methods, such as cable-staying, coupling and anchor-strut pole. These solutions involve supporting the telecommunications poles to reinforce the overhead supports.

The rollout of telecommunications cables involves numerous transition points that can be exposed to various types of damage. Cable protection is therefore essential to ensure the long-term...

The rollout of telecommunications cables involves numerous transition points that can be exposed to various types of damage. Cable protection is therefore essential to ensure the long-term viability of telecoms networks and to limit the need to carry out work on them. In response, Telenco offers a range of protective equipment, from sheaths for running cables along a support, to overhead-underground transitions and electrical protection for Figure 8 cables.

The Telenco Group has developed a comprehensive range of anchoring solutions for all subscriber connection requirements, tailored to the specific characteristics of the cables and the context...

The Telenco Group has developed a comprehensive range of anchoring solutions for all subscriber connection requirements, tailored to the specific characteristics of the cables and the context in which they are used.

The Telenco Group offers a range of "spiral" technology anchoring devices and accessories for connecting to supports for installing ADSS transport cables over spans of 90 to 600 metres.

The Telenco Group offers a range of "spiral" technology anchoring devices and accessories for connecting to supports for installing ADSS transport cables over spans of 90 to 600 metres.

Telenco, a specialist in overhead cable anchors, has developed a range of products that are both robust and easy to install, and that can be adapted to the different configurations of distribution...

Telenco, a specialist in overhead cable anchors, has developed a range of products that are both robust and easy to install, and that can be adapted to the different configurations of distribution networks.

Telenco offers articulated or rigid suspension clamps for connecting a subscriber drop cable fixed to several alignment poles.

When the engineering study of the line allows the use of suspension clamps, the Telenco Group offers reinforced devices with furs or "spiral" technology to fix the ADSS transport cables...

When the engineering study of the line allows the use of suspension clamps, the Telenco Group offers reinforced devices with furs or "spiral" technology to fix the ADSS transport cables to alignment supports.

Where topography and technical constraints allow, cables can be suspended, enabling rapid rollout of overhead lines. The Telenco Group's suspension clamps can be fixed to a cross-arm or...

Where topography and technical constraints allow, cables can be suspended, enabling rapid rollout of overhead lines. The Telenco Group's suspension clamps can be fixed to a cross-arm or directly to a post.

Facade rollout solutions enable an overhead network to be connected to the subscriber by means of special fixing devices. These devices guarantee optimum fixing. Reliable and secure, they...

Facade rollout solutions enable an overhead network to be connected to the subscriber by means of special fixing devices. These devices guarantee optimum fixing. Reliable and secure, they respect the aesthetics of the environment in which they are installed.

Accessories can be fixed to the posts using lag bolts or bolts, or stainless steel straps. Telenco offers its own range of strapping, available in several shades depending on the characteristics...

Accessories can be fixed to the posts using lag bolts or bolts, or stainless steel straps. Telenco offers its own range of strapping, available in several shades depending on the characteristics of the installation.

To support field engineers in their day-to-day work, Telenco has developed a comprehensive range of tools dedicated to network maintenance and rollout. Telenco has selected renowned manufacturers...

To support field engineers in their day-to-day work, Telenco has developed a comprehensive range of tools dedicated to network maintenance and rollout. Telenco has selected renowned manufacturers to offer a range of high-performance, durable tools. The Group also relies on its own brand, TED, to offer a technical and economic alternative that is appreciated by field engineers.

Work on telecoms networks takes place in demanding environments: roadways, working at heights, electrical environment, bad weather. To address these risks, Telenco offers rigorously selected...

Work on telecoms networks takes place in demanding environments: roadways, working at heights, electrical environment, bad weather. To address these risks, Telenco offers rigorously selected protective equipment. Every job and every site require all the resources necessary to ensure the collective and individual safety of field engineers and users.

Protecting cables, cleaning and preparing optical fibres, lubricating pipes, etc. At each stage of the rollout, field engineers need additional products to carry out their work. All our...

Protecting cables, cleaning and preparing optical fibres, lubricating pipes, etc. At each stage of the rollout, field engineers need additional products to carry out their work. All our products are tested by our technical teams to guarantee their quality and compliance with regulations.

Very high-speed networks require test and measurement equipment that improves the productivity of production teams, qualifies infrastructures and can perform all the diagnostics required...

Very high-speed networks require test and measurement equipment that improves the productivity of production teams, qualifies infrastructures and can perform all the diagnostics required for maintenance.

Rolling out FTTx networks requires reliable, robust, high-performance equipment for optical splicing. Our range of optical splicers meets all the requirements of the field, combining portability...

Rolling out FTTx networks requires reliable, robust, high-performance equipment for optical splicing. Our range of optical splicers meets all the requirements of the field, combining portability and innovation.

Identifying networks is an essential stage in the rollout of optical lines. All infrastructures must be easily and durably identified and marked to enable networks to be operated and maintained.

Identifying networks is an essential stage in the rollout of optical lines. All infrastructures must be easily and durably identified and marked to enable networks to be operated and maintained.

Field-mountable connectors offer optical performance similar to that provided by standard connectors. They are quick and easy to install on site, and extremely reliable. These connectors...

Field-mountable connectors offer optical performance similar to that provided by standard connectors. They are quick and easy to install on site, and extremely reliable. These connectors can be installed on 250 µm, 900 µm or 3 mm fibre-optic cables.

Telenco's range of optical extension products provides flexibility when installing or moving optical telecommunications outlets within homes, thanks to optical extensions and remote outlets.

Telenco's range of optical extension products provides flexibility when installing or moving optical telecommunications outlets within homes, thanks to optical extensions and remote outlets.

Telenco's single-mode optical pigtails are fibre-optic cables with a connector installed on one end, leaving the other end bare. The side with the connector can be connected to equipment,...

Telenco's single-mode optical pigtails are fibre-optic cables with a connector installed on one end, leaving the other end bare. The side with the connector can be connected to equipment, and the other side soldered with fibre-optic cables. Pigtails are used to terminate fibre-optic cables by fusion or mechanical splicing. They serve to interconnect telecoms networks and are therefore very much in demand. They can be fitted with standard SC, LC and FC connectors.

Telenco's pre-terminated single-mode risers have been developed to facilitate the vertical distribution of optical fibres inside buildings, along a technical duct or via trunking. They...

Telenco's pre-terminated single-mode risers have been developed to facilitate the vertical distribution of optical fibres inside buildings, along a technical duct or via trunking. They provide a fast connection between the Building Entry Point (PMI) and the Floor Distribution Box (FDB). Telenco®'s risers are 100% configurable and terminable on one or both sides.

Telenco offers a range of modular swivelling patch panels specifically designed for patching optical fibres in FTTH networks. They are mainly intended for street cabinets and open frames,...

Telenco offers a range of modular swivelling patch panels specifically designed for patching optical fibres in FTTH networks. They are mainly intended for street cabinets and open frames, and can also be installed in conventional cabinets. These swivelling patch panels open to the left by swivelling (right-hand swivelling on request), giving full access to the rear of the patch panel and the splice trays while leaving the patch cords connected. They are equipped with optical adaptors and assembled pigtails, splice trays, and accessories. They are available in 1U, 2U and 3U sizes and in splitter and splice versions.

Outdoor FTTH (Fibre To The Home) cabinets are specifically designed to connect subscribers in medium-density and low-density areas. They meet the demand for multi-operator pooling of FTTH...

Outdoor FTTH (Fibre To The Home) cabinets are specifically designed to connect subscribers in medium-density and low-density areas. They meet the demand for multi-operator pooling of FTTH access networks. These cabinets are used to patch optical fibres from backhaul cables to FTTH distribution cables. Depending on the density of the area to be connected, several cabinet models are available.

Eline® riser cables are specially designed for the vertical distribution of optical fibre inside buildings. They can also be laid in cable management pathways or pulled through ducts. With...

Eline® riser cables are specially designed for the vertical distribution of optical fibre inside buildings. They can also be laid in cable management pathways or pulled through ducts. With a large internal diameter and a non-twisted micromodule construction, Eline® riser cables allow easy access to the optical fibre by creating an opening window in the outer sheath. The fibre extracted from a micromodule can then be used to make a spliced connection to a drop cable inside a Floor Distribution Box.

Droptic® Nano blown cables are used for outdoor applications. Their black HDPE outer sheath provides a good seal and UV resistance, guaranteeing optimum mechanical performance. These cables...

Droptic® Nano blown cables are used for outdoor applications. Their black HDPE outer sheath provides a good seal and UV resistance, guaranteeing optimum mechanical performance. These cables are specially designed to be blown into microducts with a diameter of 3.5 to 6.0 mm over long distances.

Telenco's single-mode PLC splitters are based on planar chip technology. This technology contains silicon microstrip chips that form a waveguide grating with very high stability in the...

Telenco's single-mode PLC splitters are based on planar chip technology. This technology contains silicon microstrip chips that form a waveguide grating with very high stability in the wavelength range from 1260 to 1660 nm. These splitters are the main components of FTTx/PON (Passive Optical Network) and CATV (Community Antenna Television) networks. They are easily installed in splice trays, fibre-optic patch panels or optical splice protection boxes. They are used to divide an optical signal at the splitter input into several fibres at the splitter output.

Telenco single-mode adaptors can be used to couple fibre-optic connectors. They are fitted with a high-precision ceramic sleeve and offer excellent optical performance.